Package Include:
4 x Receiver: S1PF3-DC12 / S1PF3-DC24
1 x Transmitter: CB-12
1 x User manual
Application:
This DC 12V 24V 30A wireless remote control switch kit with four 1 channel radio receivers and one 6 buttons RF transmitter, for long range remote control four DC motors positive rotation and reverse rotation.
Widely used in electrical equipment with DC motors, such as rolling blinds, rolling doors, projection screens, awnings, conveyors, etc.
Features:
Wireless remote control, easy to install.
Two operating voltage versions: DC 12V, 24V optional.
You can remote control DC motor positive rotation, reverse rotation or stop rotation with the transmitter from any place within a reliable distance.
You also can control DC motor positive rotation, reverse rotation or stop rotation by button on the receiver.
With reverse power protection and over current protection.
The RF wireless signal can pass through walls, floors and doors.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No: S1PF3-DC
Operating Voltage: 12±1VDC (model S1PF3-DC12), or 24±2VDC (model S1PF3-DC24), the operating voltage must be specified when ordering.
Channel: 1-CH
Quiescent Current: ≤6mA
Rated Current: 15A
The Maximum Instantaneous Current of Starting Motor: 30A
Control Mode: Interlocking
Working Frequency: 433.92 MHz
Wire range for the terminals: 22-12 AWG
Operating Temperature: -20 ° C to +70 ° C
Case size: 100mm x 67mm x 39mm
Transmitter Parameters:
Model No.: 0021029 (CB-12)
Channel/Button: 12
Button Symbol: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
Operating Voltage: 9V (1 x 6F22 -9V battery, can be used for 12 months)
Operating Current: 30mA
Operating Frequency: 433MHz
Transmitting Distance: 1000 meters / 3000ft (theoretically)
It has an on / off button on the side.
Modulation Mode: ASK
Operating Temperature: -20 ° C to +70 ° C
Unit Size: Unit Size: 135 x 42 x 25 mm (5.3 x 1.7 x 1.0 inches)
Working Range:
With a transmitter (such as CB-12) to form a complete set, the maximum working distance can reach 1000 meters in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
Setting different control modes:
1) Setting Interlocking mode: Connect JP1 or disconnect JP1&JP2
1-1) Wireless remote control DC motor through transmitter CB-12:
Press button 1 on the transmitter: the terminal "MOTOR" of the receiver 1 outputs DC power, and the connected DC motor 1 rotates in positive direction.
Press button 2 on the transmitter: the terminal "MOTOR" of the receiver 1 outputs DC power, and the connected DC motor 1 rotates in reversal direction.
Press button 3 on the transmitter: the terminal "MOTOR" of the receiver 1 stops outputting DC power, and the connected DC motor 1 stops rotating.
...
Press button 10 on the transmitter: the terminal "MOTOR" of the receiver 4 outputs DC power, and the connected DC motor 4 rotates in positive direction.
Press button 11 on the transmitter: the terminal "MOTOR" of the receiver 4 outputs DC power, and the connected DC motor 4 rotates in reversal direction.
Press button 12 on the transmitter: the terminal "MOTOR" of the receiver 4 stops outputting DC power, and the connected DC motor 4 stops rotating.
1-2) Control DC motor through the buttons on the receiver:
Press the button "K3" on the receiver: the terminal "MOTOR" of the receiver outputs DC power, and the connected DC motor rotates in positive direction.
Press the button "K1" on the receiver: the terminal "MOTOR" of the receiver outputs DC power, and the connected DC motor rotates in reversal direction.
Press the button "K2" on the receiver: the terminal "MOTOR" of the receiver stops outputting DC power, and the connected DC motor stops rotating.
2) Setting Momentary mode: Connect JP2
2-1) Wireless remote control DC motor through transmitter CB-12:
Press and hold the button 1 on the transmitter: the terminal "MOTOR" of the receiver 1 outputs DC power, and the connected DC motor 1 rotates in positive direction.
Release the button 1 on the transmitter: the terminal "MOTOR" of the receiver 1 stops outputting DC power, and the connected DC motor 1 stops rotating.
Press and hold the button 2 on the transmitter: the terminal "MOTOR" of the receiver 1 outputs DC power, and the connected DC motor 1 rotates in reversal direction.
Release the button 2 on the transmitter: the terminal "MOTOR" of the receiver 1 stops outputting DC power, and the connected DC motor 1 stops rotating.
...
Press and hold the button 10 on the transmitter: the terminal "MOTOR" of the receiver 4 outputs DC power, and the connected DC motor 4 rotates in positive direction.
Release the button 10 on the transmitter: the terminal "MOTOR" of the receiver 4 stops outputting DC power, and the connected DC motor 4 stops rotating.
Press and hold the button 11 on the transmitter: the terminal "MOTOR" of the receiver 4 outputs DC power, and the connected DC motor 4 rotates in reversal direction.
Release the button 11 on the transmitter: the terminal "MOTOR" of the receiver 4 stops outputting DC power, and the connected DC motor 4 stops rotating.
2-2) Control DC motor through the buttons on the receiver:
Press and hold the button "K3" on the receiver: the terminal "MOTOR" of the receiver outputs DC power, and the connected DC motor rotates in positive direction.
Release the button "K3" on the receiver: the terminal "MOTOR" of the receiver stops outputting DC power, and the connected DC motor stops rotating.
Press and hold the button "K1" on the receiver: the terminal "MOTOR" of the receiver outputs DC power, and the connected DC motor rotates in reversal direction.
Release the button "K1" on the receiver: the terminal "MOTOR" of the receiver stops outputting DC power, and the connected DC motor stops rotating.
Restrictive function:
You can connect two restrictive switches to terminals “X1” and “X2”, if the restrictive switch X1 or X2 is connected, the motor will rotate; if the restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch “X1” is connected, the motor will rotate in positive direction; when the restrictive switch “X1” is disconnected, motor will stop automatically. When the restrictive switch “X2” is connected, the motor will rotate in reversal direction; when the restrictive switch “X2” is disconnected, motor will stop automatically.