Application:
This wireless RF remote control switch (receiver) is an electric device with 1 channel DC 6V~36V 3A input output, it and the transmitter form a radio transmitter and receiver system. This system may be can long range remote control DC lamp/light, solar light, DC fan, DC pump, electric door lock, Electromagnetic lock, etc.
Feature:
Wireless control, easy to install.
Wide operating voltage range: DC 6V~36V
DC Power Output: It can control DC equipment with voltage DC 6V~36V.
The transmitter / remote can control the receiver from any place within a reliable working distance.
The wireless RF signal from the transmitter can pass through walls, floors, doors or windows, but it will lose some operating range.
The receiver only works with the selected transmitter which is matched to the receiver.
One or more transmitters / remotes can control several or one receivers simultaneously.
Two or more receivers may be used in the same area.
Receiver Parameters:
Model No.: S1X2-DC
Power Supply (Operating Voltage): DC 6~36V
Output: DC 6~36V
Channel: 1 CH
Control Modes: Self-locking, Momentary, Interlocking
Maximum Power: 50W
Static Current: ≤6mA
Maximum Working Current: 3A
PCB Size: 27mm x 16mm x 7mm
Transmitter Parameters:
Model No.: 0021001 (C-2)
With Sliding Cover: Slide up when it doesn’t work (to protect the button). Slide down the button will appear.
Channel/Button: 2
Button Symbol: A, B
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Operating Frequency: 433.92 MHz
Transmitting Distance: 100m / 300ft (theoretically)
Modulation Mode: ASK
Unit Size: 58mm x 39mm x 16mm
Matching Transmitters:
The receiver can work with different transmitters, such as model C-2 (100 Meter / 300 feet range), CP-2 (500 Meter / 1500 feet range), or CB-2 (1000 Meter / 3000 feet range).
Working Range:
With a transmitter (such as C-2) to form a complete set, the maximum working distance can reach 100M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can use a powerful transmitter, such as CB-2 transmitter.
Setting different control modes:
1) Setting control mode Self-locking: Do not connect.
Press button A of the transmitter: Output terminals output DC power, the lamp connected to the receiver is turned on.
Press button A of the transmitter again: Output terminals stop outputting, the lamp connected to the receiver is turned off.
2) Setting control mode Momentary: Only connect terminal 3 and 4.
Press and hold button A of the transmitter: Output terminals output DC power, the lamp connected to the receiver is turned on.
Release the button A of the transmitter: Output terminals stop outputting, the lamp connected to the receiver is turned off.
3) Setting control mode Interlocking: Only connect terminal 1 and 2.
Press button A of the transmitter: Output terminals output DC power, the lamp connected to the receiver is turned on.
Press button B of the transmitter: Output terminals stop outputting, the lamp connected to the receiver is turned off.
Package Include:
1 x Receiver: S1X2-DC
1 x Transmitter: C-2
1 x User manual