Application:
It can long range control variety of home appliances and electronic products in any place worldwide by fixed telephone or mobile phone. Such as remote control lamp, light, motor, linear actuator, electric solenoid valve, pump, lock, ceiling fan, winch, blinds, door, window, heater, curtains, etc.
Feature:
Wireless control, easy to install.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
With password protection.
Specification:
Model No.: TC01
Operating Voltage: 12±1VDC
Quiescent Current: ≤8mA
Channel: 2 CH
Output Type: Dry Relays Output (Normally Open and Normally Closed)
Maximum Load Voltage of Relay: 240VAC or 28VDC
Maximum Load Current of Relay: 10A / each channel
Wire Range of Terminals: 22-12AWG
Operating Temperature: -20°C ~ +70°C
Size: 92mm x 44mm x 20mm
Wiring:
1) If you want to control a DC 12V lamp, do as following:
1.1) Connect DC 12V power supply and phone line to the module.
1.2) Connect terminal "C" to the positive pole of DC power supply, connect terminal "B" to the positive pole of DC lamp, and connect the negative pole of DC lamp to the negative pole of DC power supply.
2) If you want to control an AC 220V lamp, do as following:
2.1) Connect DC 12V power supply and phone line to the module.
2.2) Connect terminal C to the live wire of AC power supply, connect terminal B to one side of AC lamp, and connect another side of AC lamp to the neutral wire of AC power supply.
Operating:
1) Dial the telephone number with which the module sets up;
2) The telephone could be connected automatically after 6 ringing. Then input “password” to enter into the menu, the preset password is 5678. If the password is wrong, the telephone will hang up automatically.
3) Press button 1 on the phone: The relay 1 in the module is activated, and the connected lamp 1 is turned on.
4) Press button 2 on the phone: The relay 1 in the module is deactivated, and the connected lamp 1 is turned off.
5) Press button 3 on the phone: The relay 2 in the module is activated, and the connected lamp 2 is turned on.
6) Press button 4 on the phone: The relay 2 in the module is deactivated, and the connected lamp 2 is turned off.
7) Press the button "#" on the phone to exit.
How to change the password (4 bits):
1) Dial the telephone number with which the module sets up;
2) The telephone could be connected automatically after 6 ringing. Then input “password” to enter into the menu, the preset password is 5678. If the password is wrong, the telephone will hang up automatically.
3) Press button "*" + "new password" + "*"
4) Press button "#": Ring off.
Note:
1. If DC 12V power supply was cut off, the module will be reverted to the preset password 5678.
2. If you do not press button “#”, the telephone will hang up automatically after 75 seconds.
It can long range control variety of home appliances and electronic products in any place worldwide by fixed telephone or mobile phone. Such as remote control lamp, light, motor, linear actuator, electric solenoid valve, pump, lock, ceiling fan, winch, blinds, door, window, heater, curtains, etc.
Feature:
Wireless control, easy to install.
Relay Output: This receiver is dry relay output, it can be used to operate both DC and AC equipment. The output terminals are NO / NC (normally open / normally closed), serving as a switch.
With password protection.
Specification:
Model No.: TC01
Operating Voltage: 12±1VDC
Quiescent Current: ≤8mA
Channel: 2 CH
Output Type: Dry Relays Output (Normally Open and Normally Closed)
Maximum Load Voltage of Relay: 240VAC or 28VDC
Maximum Load Current of Relay: 10A / each channel
Wire Range of Terminals: 22-12AWG
Operating Temperature: -20°C ~ +70°C
Size: 92mm x 44mm x 20mm
Wiring:
1) If you want to control a DC 12V lamp, do as following:
1.1) Connect DC 12V power supply and phone line to the module.
1.2) Connect terminal "C" to the positive pole of DC power supply, connect terminal "B" to the positive pole of DC lamp, and connect the negative pole of DC lamp to the negative pole of DC power supply.
2) If you want to control an AC 220V lamp, do as following:
2.1) Connect DC 12V power supply and phone line to the module.
2.2) Connect terminal C to the live wire of AC power supply, connect terminal B to one side of AC lamp, and connect another side of AC lamp to the neutral wire of AC power supply.
Operating:
1) Dial the telephone number with which the module sets up;
2) The telephone could be connected automatically after 6 ringing. Then input “password” to enter into the menu, the preset password is 5678. If the password is wrong, the telephone will hang up automatically.
3) Press button 1 on the phone: The relay 1 in the module is activated, and the connected lamp 1 is turned on.
4) Press button 2 on the phone: The relay 1 in the module is deactivated, and the connected lamp 1 is turned off.
5) Press button 3 on the phone: The relay 2 in the module is activated, and the connected lamp 2 is turned on.
6) Press button 4 on the phone: The relay 2 in the module is deactivated, and the connected lamp 2 is turned off.
7) Press the button "#" on the phone to exit.
How to change the password (4 bits):
1) Dial the telephone number with which the module sets up;
2) The telephone could be connected automatically after 6 ringing. Then input “password” to enter into the menu, the preset password is 5678. If the password is wrong, the telephone will hang up automatically.
3) Press button "*" + "new password" + "*"
4) Press button "#": Ring off.
Note:
1. If DC 12V power supply was cut off, the module will be reverted to the preset password 5678.
2. If you do not press button “#”, the telephone will hang up automatically after 75 seconds.