Application:
This 1 channel DC 6V 9V 12V 24V 10A wireless remote control switch kit with radio receiver and RF transmitter, for long range remote control DC motor positive rotation and reverse rotation.
Widely used in electrical equipment with DC motors, such as rolling blinds, rolling doors, projection screens, awnings, conveyors, etc.
Features:
Wireless remote control, easy to install.
Four operating voltage versions: DC 6V, 9V, 12V, 24V optional.
You can remote control DC motor positive rotation, reverse rotation or stop rotation with the transmitter from any place within a reliable distance.
You also can control DC motor positive rotation, reverse rotation or stop rotation by button on the receiver.
With reverse power protection and over current protection.
The RF wireless signal can pass through walls, floors and doors.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No: S1FU-DC
Operating Voltage: 6VDC (model S1FU-DC06), or 9±1VDC (model S1FU-DC09), or 12±1VDC (model S1FU-DC12), or 24±2VDC (model S1FU-DC24), the operating voltage must be specified when ordering.
Control Mode: Momentary and Interlocking
Working Frequency: 433.92 MHz
Quiescent Current: ≤6mA
Wire range for the terminals: 22-14 AWG
Channel: 1 CH, can work with 1 DC motor
Maximum Working Current: 10A / each channel, so motor's maximum starting current can not exceed 10A.
Operating Temperature: -20 ° C to +70 ° C
PCB size: 67mm x 50mm x 18mm
Case size: 75mm x 54mm x 27mm
Transmitter Parameters:
Model No.: 0021004 (C-3-2)
With Sliding Cover: Slide up when it doesn’t work (to protect the button). Slide down the button will appear.
Channel/Button: 3
Button Symbol: ▲, ▼, ■
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Operating Frequency: 433.92MHz
Transmitting Distance: 100m / 300ft (theoretically)
If you stretches the telescopic antenna, it can have a further working range, which is twice as much as it used to be.
Modulation Mode: ASK
Unit Size: 58mm x 39mm x 16mm
Matching Transmitters:
This receiver can work with different transmitters. such as model C-3-2 (100 meters), or CB-3-2 (1000 meters) etc.
Working Range:
With a transmitter (such as C-3-2) to form a complete set, the maximum working distance can reach 100M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can install an external antenna to the receiver, and you also can use a powerful transmitter, such as transmitter CB-3-2.
Setting different control modes:
1) Setting Interlocking mode: Disconnect Jumper-1 and Jumper-2.
Mode Interlocking (working with transmitter C-3-2):
Press button ▲ of transmitter: Motor rotates in positive direction.
Press button ▼ of transmitter: Motor rotates in reversal direction.
Press button ■ of transmitter: Motor stops.
2) Setting Momentary mode: Only connect Jumper-1
Mode Momentary (working with transmitter C-3-2):
Press and hold button ▲ of transmitter: Motor rotates in positive direction. Release button ▲ of transmitter: Motor stops.
Press and hold button ▼ of transmitter: Motor rotates in reversal direction. Release button ▼ of transmitter: Motor stops
Package Include:
1 x Receiver: S1FU-DC
2 x Transmitter: C-3-2
1 x User manual
This 1 channel DC 6V 9V 12V 24V 10A wireless remote control switch kit with radio receiver and RF transmitter, for long range remote control DC motor positive rotation and reverse rotation.
Widely used in electrical equipment with DC motors, such as rolling blinds, rolling doors, projection screens, awnings, conveyors, etc.
Features:
Wireless remote control, easy to install.
Four operating voltage versions: DC 6V, 9V, 12V, 24V optional.
You can remote control DC motor positive rotation, reverse rotation or stop rotation with the transmitter from any place within a reliable distance.
You also can control DC motor positive rotation, reverse rotation or stop rotation by button on the receiver.
With reverse power protection and over current protection.
The RF wireless signal can pass through walls, floors and doors.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No: S1FU-DC
Operating Voltage: 6VDC (model S1FU-DC06), or 9±1VDC (model S1FU-DC09), or 12±1VDC (model S1FU-DC12), or 24±2VDC (model S1FU-DC24), the operating voltage must be specified when ordering.
Control Mode: Momentary and Interlocking
Working Frequency: 433.92 MHz
Quiescent Current: ≤6mA
Wire range for the terminals: 22-14 AWG
Channel: 1 CH, can work with 1 DC motor
Maximum Working Current: 10A / each channel, so motor's maximum starting current can not exceed 10A.
Operating Temperature: -20 ° C to +70 ° C
PCB size: 67mm x 50mm x 18mm
Case size: 75mm x 54mm x 27mm
Transmitter Parameters:
Model No.: 0021004 (C-3-2)
With Sliding Cover: Slide up when it doesn’t work (to protect the button). Slide down the button will appear.
Channel/Button: 3
Button Symbol: ▲, ▼, ■
Operating Voltage: 12V (1 x 23A -12V battery, can be used for 12 months)
Operating Current: 6mA
Operating Frequency: 433.92MHz
Transmitting Distance: 100m / 300ft (theoretically)
If you stretches the telescopic antenna, it can have a further working range, which is twice as much as it used to be.
Modulation Mode: ASK
Unit Size: 58mm x 39mm x 16mm
Matching Transmitters:
This receiver can work with different transmitters. such as model C-3-2 (100 meters), or CB-3-2 (1000 meters) etc.
Working Range:
With a transmitter (such as C-3-2) to form a complete set, the maximum working distance can reach 100M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this maximum working distance.
If you want to have a further working range, you can install an external antenna to the receiver, and you also can use a powerful transmitter, such as transmitter CB-3-2.
Setting different control modes:
1) Setting Interlocking mode: Disconnect Jumper-1 and Jumper-2.
Mode Interlocking (working with transmitter C-3-2):
Press button ▲ of transmitter: Motor rotates in positive direction.
Press button ▼ of transmitter: Motor rotates in reversal direction.
Press button ■ of transmitter: Motor stops.
2) Setting Momentary mode: Only connect Jumper-1
Mode Momentary (working with transmitter C-3-2):
Press and hold button ▲ of transmitter: Motor rotates in positive direction. Release button ▲ of transmitter: Motor stops.
Press and hold button ▼ of transmitter: Motor rotates in reversal direction. Release button ▼ of transmitter: Motor stops
Package Include:
1 x Receiver: S1FU-DC
2 x Transmitter: C-3-2
1 x User manual